Dodge Sprinter 2006 Manual page 1645

VA
Fig. 78 SPECIAL TOOL 9525
1 - SPECIAL TOOL 9525
(3) Assem ble specia l t ool #9312–1 u sin g 9312– 3
a n d 9312–4. In st a ll in ser t #9312–13 a n d r et a in wit h
scr ew pr ovided. (F ig. 79).
CAUTION: Care must be taken not to drop the tim-
ing chain plates into the engine once the timing
chain is separated.
NOTE: When installing special tool #9312–1 onto
timing chain link, be sure to back off the smaller
nut of the thrust pin #9312–3 until the pin is
recessed inside of the spindle, #9312–4. Screw the
thrust spindle #9312–4 in until it is seated and
aligned properly over the rivet of the timing chain.
NOTE: When fitting the thrust spindle, ensure that
the thrust pin is positioned at the left timing chain
pin of a chain link.
(4) In st a ll specia l t ool #9312 on t o t im in g ch a in
lin k (F ig. 79).
Fig. 79 SPECIAL TOOL #9312–1 WITH INSERT
1 - SPECIAL TOOL #9312-1
2 - SPECIAL TOOL #9312-13 - INSERT
3 - SPECIAL TOOL #9312-3 - THRUST PIN
4 - SPECIAL TOOL #9312-4 - SPINDLE
NOTE: Cover the timing chain area. Care must be
taken not to drop any repair debris or pieces into
the engine when separating the timing chain links.
(5) Ca r efu lly t u r n t h e t h r u st pin #9312–3 of spe-
cia l t ool #9312–1 clockwise wh ile h oldin g t h e h a n dle
u n t il t h e r ivet is pr essed ou t a n d t h e ch a in is sepa -
r a t ed (F ig. 80). Disca r d t h e loose lin k a n d pla t es.
NOTE: One whole timing chain link must be
removed.
ENGINE 9 - 75
9312–13