Output Specifications; Interrupt Inputs And Quick-Response Inputs; Relay Outputs - Omron CP1L-EL20DR-D Operation Manual

Specifications
Interrupt Inputs and
Quick-response Inputs

Output Specifications

Relay Outputs

Input Bits for High-speed Counters
Counter Single phase
High-speed counter 0 CIO 0.00
High-speed counter 1 CIO 0.01
High-speed counter 2 CIO 0.02
High-speed counter 3 CIO 0.03
Pulse plus direction input mode,
Increment mode
Up/down input mode
10.0 μs min.
ON
OFF
2.5 μs 2.5 μs
min. min.
Input bits: CIO 0.04 to CIO 0.09
ON
OFF
50 μs 50 μs
min. min.
With CPU Units with 20, 30 or 40 I/O points, the six input bits from CIO 0.04 to
CIO 0.09 can be used as either normal inputs or as interrupt or quick-
response inputs depending on the settings in the PLC Setup.
Input bits
CIO 0.04 Interrupt input 0
CIO 0.05 Interrupt input 1
CIO 0.06 Interrupt input 2
CIO 0.07 Interrupt input 3
CIO 0.08 Interrupt input 4
CIO 0.09 Interrupt input 5
Item
Max. switching capacity
Min. switching capacity
Service life Electrical
of relay
Mechanical
ON delay
OFF delay
Circuit configuration
Phase A
CIO 0.00
CIO 0.02
---
---
Differential phase mode
ON
90%
OFF
50%
10%
ON
OFF
90%
10%
Interrupt inputs
Quick-response input 0
Quick-response input 1
Quick-response input 2
Quick-response input 3
Quick-response input 4
Quick-response input 5
2 A, 250 VAC (cosφ = 1)
2 A, 24 VDC (4 A/common)
10 mA, 5 VDC
Resistive 100,000 operations (24 VDC)
load
Inductive 48,000 operations (250 VAC, cosφ = 0.4)
load
20,000,000 operations
15 ms max.
15 ms max.
Output LED
Internal
circuits
Section 2-2
Phase B Phase Z
CIO 0.01 CIO 0.04
CIO 0.03 CIO 0.05
--- ---
--- ---
20.0 μs min.
90%
50%
10%
90%
50%
10%
T T T T
1 2 3 4
: 2.5 μs min.
T , T , T , T
1 2 3 4
Quick-response inputs
Specification
OUT
OUT
Maximum
COM
250 VAC: 2 A
24 VDC: 2 A
37