Omron CP1L-EL20DR-D Operation Manual page 248

Automatic Clock Adjustment and Specifying Servers by Host Name
214
Item
Obtain clock If this option is selected, the CPU Unit's clock is set to
data from SNTP the time at the SNTP server's clock.
server
Auto Adjustment Set the time at which the SNTP server is to be
accessed to synchronize the clocks.
When the time that is set here arrives, the SNTP
server is accessed and the CPU Unit clock is
adjusted to match the SNTP server clock.
Designation Select whether the SNTP server used for automatic
Method clock adjustment is to be specified by IP address or
by host domain name (i.e., by host name).
IP Address Set the IP address for the SNTP server that is to be
used for automatic clock adjustment.
This setting is enabled only when server specification
by IP address has been selected.
Host Name Set the host domain name (i.e., the host name) for
the SNTP server that is to be used for automatic
clock adjustment.
This setting is enabled only when server specification
by host name has been selected.
Port No. Set the port number for connecting to the SNTP
server that is to be used for automatic clock adjust-
ment.
This setting does not normally need to be changed.
Retry Timer Set the time to elapse before retrying when a connec-
tion to the SNTP server fails.
This setting does not normally need to be changed.
Time Lag This sets in the CPU Unit's clock data the time differ-
Adjustment ence made up from the SNTP server's clock data.
To use the clock data from the SNTP server just as it
is, input 0.
Contents
Section 6-7
Default
Not
checked
0:0:0
IP Address
0.0.0.0
None
0
(Number
123 is
used.)
0
(10 s)
+0:0