Operation Using The Cx-Programmer - Omron CP1L-EL20DR-D Operation Manual

Memory Cassette Functions
8-6-3

Operation Using the CX-Programmer

1,2,3...
(2) Absolutely do not remove the Memory Cassette while the BKUP indicator
is flashing (i.e., during a data transfer or verification). Doing so could
make the Memory Cassette unusable.
(3) The Memory Cassette is small, so be careful to not let it be dropped or
lost when it is removed.
Use the following procedure for the Memory Cassette function.
1. Select PLC - Edit - Memory Cassette/DM.
The following Memory Cassette Transfer/Data Memory Backup Dialog Box
will be displayed.
2. Under Transfer Data Area, check whatever types of data are to be trans-
ferred.
Click the Valid Area Check Button to check the valid areas in the Memory
Cassette mounted in the CPU Unit and the operating mode after automatic
transfer at startup. If the user program is specified to be written, select the
operating mode after automatic transfer at startup.
• PROGRAM mode (default): Used, e.g., to copy the system.
• Use PLC Setup: Used, e.g., for operation with the Memory Cassette.
3. Execute any of the following operations.
• To write data from the CPU Unit to the Memory Cassette:
Click the PLC  Memory Cassette Button.
• To read data from the Memory Cassette to the CPU Unit:
Click the Memory Cassette  PLC Button.
• To verify data transferred between the CPU Unit and the Memory Cas-
sette:
Click the Compare Button. This will cause all areas to be verified re-
gardless of the items checked under Transfer Area.
• To format the Memory Cassette:
Click the Format Button. This will cause all areas to be formatted re-
gardless of the items checked under Transfer Area.
Section 8-6
435