I/O Wiring; Range Comparison Table Settings - Omron CP1L-EL20DR-D Operation Manual

High-speed Counters
Upper Terminal Block
Bottom terminal block
(Example: Relay Output
Models)
■

I/O Wiring

Input Wiring
+ -
COM
00
NC
Measurement
start switch
Output Wiring
PL1
NC 00
NC COM
■

Range Comparison Table Settings

The inspection standards data is set in the DM Area with the CX-Programmer.
Even though range 1 is the only range being used, all 40 words must still be
dedicated to the range comparison table.
Word Setting
D10000 7430
D10001 0000
D10002 765C
D10003 0000
D10004 000A
D10005 to All 0000 Range 2 lower and upper limit values
D10008
D10009 FFFF
01 03 05 07 09 11
02 04 06 08 10
CIO 100
PL1: OK indicator
PL2: NG indicator
PL2
04 06
01 02 03
COM COM COM
05 07
CIO 100
Function
Rightmost 4 digits of range 1 lower limit
Leftmost 4 digits of range 1 lower limit
Rightmost 4 digits of range 1 upper limit
Leftmost 4 digits of range 1 upper limit
Range 1 interrupt task number = 10 (A hex)
(Not used and don't need to be set.)
Disables range 2.
~
Section 7-1
01 03 05 07 09
00 02 04 06 08 10
CIO 101
00 01 03 04 06
COM COM
02 05
07
CIO 101
Lower limit value:
30,000
Upper limit value:
30,300
Range 2 settings
11
231