Pulse Output Patterns; Continuous Mode (Speed Control); Starting A Pulse Output; Changing Settings - Omron CP1L-EL20DR-D Operation Manual

Pulse Outputs
7-2-4

Pulse Output Patterns

Continuous Mode (Speed Control)

Starting a Pulse Output

Operation Example
application
Output with Changing the
specified speed (frequency)
speed in one step
Output with Accelerating the
specified speed (frequency)
acceleration at a fixed rate
and speed

Changing Settings

Operation Example applica-
tion
Change Changing the
speed in speed during oper-
one step ation
Change Changing the
speed speed smoothly
smoothly during operation
Changing the
speed in a polyline
curve during opera-
tion
Change Not supported.
direction
Change Not supported.
pulse out-
put method
244
The following tables show the kinds of pulse output operations that can be
performed by combining various pulse output instructions.
Frequency changes
Pulse frequency
Target frequency
Execution of SPED(885)
Pulse frequency
Target frequency
Acceleration/
deceleration
rate
Execution of
ACC(888)
Frequency changes
Pulse frequency
Target frequency
Present frequency
Execution of
SPED(885)
Pulse frequency
Target frequency
Acceleration/
deceleration
rate
Present frequency
Execution of
ACC(888)
Pulse frequency
Acceleration rate n
Target frequency
Acceleration
rate 2
Acceleration
rate 1
Present frequency
Execution of ACC(888)
Execution of ACC(888)
Execution of ACC(888)
Description
Outputs pulses at a
specified frequency.
Time
Outputs pulses and
changes the fre-
quency at a fixed
rate.
Time
Description
Changes the fre-
quency (higher or
lower) of the pulse
output in one step.
Time
Changes the fre-
quency from the
present frequency
at a fixed rate. The
frequency can be
accelerated or
decelerated.
Time
Changes the accel-
eration or decelera-
tion rate during
acceleration or
deceleration.
Time
Section 7-2
Procedure
Instruction Settings
SPED(885) • Port
(Continuous) "CW/CCW"
or "Pulse +
direction"
• Continuous
• Target fre-
quency
ACC(888) • Port
(Continuous) • "CW/CCW"
or "Pulse +
direction"
• Continuous
• Accelera-
tion/decel-
eration rate
• Target fre-
quency
Procedure
Instruction Settings
SPED(885) • Port
(Continu- • Continuous
ous) • Target fre-
↓ quency
SPED(885)
(Continu-
ous)
ACC(888) or • Port
SPED(885) • Continuous
(Continu- • Target fre-
ous) quency
↓ • Accelera-
tion/decel-
ACC(888)
eration rate
(Continu-
ous)
ACC(888) • Port
(Continu- • Continuous
ous) • Target fre-
↓ quency
• Accelera-
ACC(888)
tion/decel-
(Continu-
eration rate
ous)