Omron CP1L-EL20DR-D Operation Manual page 835

PLC Setup
Operation Adjustment Settings
Name
1 Limit output during
acceleration and con-
stant speed
2 Limit output during
deceleration and when
stopped
3 Output coefficient dur-
ing acceleration and
constant speed
4 Output coefficient dur-
ing deceleration
5 Output coefficient after
pulse output
Default Settings
Do not use Use
Do not use
Do not use Use
Do not use
0: 6 (0.01 incre- 0: 6 (0.01 incre-
ments) ments)
1 (0.01 increments)
:
255 (0.01 incre-
ments)
0: 96 (0.01 0: 96 (0.01 incre-
increments) ments)
1 (0.01 increments)
:
255 (0.01 incre-
ments)
0: 50 (0.01 0: 50 (0.01 incre-
increments) ments)
1 (0.01 increments)
:
255 (0.01 incre-
ments)
When setting is read Internal
by CPU Unit address
When power is turned 432
ON
When power is turned 432
ON
When power is turned 433
ON
When power is turned 434
ON
When power is turned 435
ON
Appendix G
Bits Settings
08 to 11 0 hex
1 hex
12 to 15 0 hex
1 hex
08 to 15 0 hex
1 hex
:
FF hex
08 to 15 0 hex
1 hex
:
FF hex
08 to 15 0 hex
1 hex
:
FF hex
801