Mounting And Removing A Memory Cassette - Omron CP1L-EL20DR-D Operation Manual

Sysmac cp series cp1l-el/em cpu unit

Table of Contents

Memory Cassette Functions

Mounting and Removing a Memory Cassette

The CX-Programmer's function for saving DM initial values is used for saving

the values in the DM Area (D0 to D32767) to the built-in flash memory as ini-

tial values. By means of a setting in the PLC Setup, these initial values can

then be automatically written to the DM Area (D0 to D32767) when the power

is turned ON.

1. Turn OFF the power supply to the PLC and removed the cover to the Mem-

ory Cassette socket.

2. Holding the Memory Cassette with the side with the nameplate facing up-

wards, insert the Memory Cassette all the way into the slot.

1. Turn OFF the power supply to the PLC.

2. Grasp the end of the Memory Cassette between the thumbnail and index

finger, and slide it upwards to remove it.

(1) Turn OFF the power supply before mounting or removing the Memory

Show Quick Links

Table of Contents