Printing An Smc Report - Ricoh BE-C1 D046 Field Service Manual

5. System Maintenance Reference

Printing an SMC Report

The SP mode settings are adjusted before shipment, and are listed in the copy of the SMC print provided
on the original table. Keep this SMC print in the used-toner-bottle cabinet as a record of the default settings.
Follow this procedure if you want to print another copy of the SMC list.
1. Enter the SP Mode.
• Press  then use the 10-key pad to enter .
• Press and hold down  for more than 3 seconds.
2. Press [Copy Mode] to return to the initial screen and select the feed source and other settings for the
print job, and then press SP Mode to return to the SP Mode.
3. Enter 5990-2 and then press .
4. Press [Start].
5
434