Ricoh BE-C1 D046 Field Service Manual page 666

8. Appendix: SP Mode Tables
This SP adjusts the length of the last section (from last fold to the trailing edge) during long fan
folding.
[-20 to +20/0/0.1 mm]
Note: Adjustment in the "-" or "+" direction decreases or increases the length.
41 Long Print: 1st Fold Peak: After 2nd Fold
This SP modifies the operation of the fan fold sensor (F) to determine the lengths of the odd and
even sections for long fan folding only.
• If the first fold is a peak fold, this SP setting determines the length of even number sections,
excluding the 1st section.
• If the first fold is a valley fold, this SP setting determines the length of odd sections.
Note: Adjustment in the "-" or "+" direction decreases or increases the length.
42 Long Print: 1st Fold Valley: After 2nd Fold
This SP modifies the operation of the fan fold sensor (R) to determine the lengths of the odd and
even sections for long fan folding.
• If the first fold is a peak fold, this SP setting determines the length of odd number sections,
excluding the 1st section.
• If the first fold is a valley fold, this SP setting determines the length of even sections.
Note: Adjustment in the "-" or "+" direction decreases or increases the length.
8
43 Margin Fold: 1st Fold Peak: After 4th Fold
This SP modifies the operation of the fan fold sensor (F) to determine the lengths of the odd and
even sections for long fan folding (including file flap or margin folding).
• If the first fold is a peak fold, this SP setting determines the length even number sections,
excluding the 1st section.
• If the first fold is a valley fold, this SP setting determines the length of odd sections.
Note: Adjustment in the "-" or "+" direction decreases or increases the length.
44 Margin Fold: 1st Fold Valley: After 2nd Fold
This SP modifies the operation of the fan fold sensor (R) to determine the lengths of the odd and
even sections for long fan folding) including file flap folding).
• If the first fold is a peak fold, this SP setting determines the length even number sections.
• If the first fold is a valley fold, this SP setting determines the length of odd sections, excluding
the 1st section.
Note: Adjustment in the "-" or "+" direction decreases or increases the length.
218