Ricoh BE-C1 D046 Field Service Manual page 191

To insert an SD card:
1. Remove the screw, and pull off the SD card slot cover [1] ( x1).
2. Insert the SD card [2] (beveled corner up) in either Slot 2 or Slot 1.
• SD cards are held in position by a small spring-lock mechanism.
• To install an SD card, push it into the slot until it stops, then release it.
• To remove an SD card, push the SD card in carefully to release it, and then remove it from the
slot.
3. Reattach the SD card slot cover ( x1).
MFP Options
2
189