Ricoh BE-C1 D046 Field Service Manual page 689

These SPs count the number of times each application is used to do a job.
[0 to 9999999/1]
Note: The L: counter is the total number of times the other applications are used to send a
job to the document server, plus the number of times a file already on the document server
is used.
• These SPs reveal the number of times an application is used, not the number of pages processed.
• When an application is opened for image input or output, this counts as one job.
• Interrupted jobs (paper jams, etc.) are counted, even though they do not finish.
• Only jobs executed by the customer are counted. Jobs executed by the customer engineer using the
SP modes are not counted.
• When using secure printing (when a password is required to start the print job), the job is counted at
the time when either "Delete Data" or "Specify Output" is specified.
• When a copy job on the document server is printed, SP8022 also increments, and when a print job
stored on the document server is printed, SP8024 also increments.
• When an original is both copied and stored on the document server, the C: and L: counters both
increment.
• When a print job is stored on the document server, only the L: counter increments.
• When the user presses the Document Server button to store the job on the document server, only the
L: counter increments.
• When the user enters document server mode and prints data stored on the document server, only the
L: counter increments.
• When an image received from Palm 2 is received and stored, the L: counter increments.
• When the customer prints a report (user code list, for example), the O: counter increments
8011 T:Jobs/LS
8012 C:Jobs/LS
8014 P:Jobs/LS
8015 S:Jobs/LS
8016 L:Jobs/LS
8017 O:Jobs/LS
These SPs count the number of jobs stored to the document server by each application, to
reveal how local storage is being used for input.
[0 to 9999999/1]
System Service Mode
8
241