Ricoh BE-C1 D046 Field Service Manual page 657

083 Stamp Trans Motor: HP Sensor : Cross Folder
084 Stamp Press Motor: Fwd : Cross Folder
085 Stamp Press Motor: Rev : Cross Folder
086 Stamp Press Motor: HP Sensor : Cross Folder
6961 Trans. Motor Adj.: Fan Folder: Number of Folder Motor Rotations
This SP adjusts the speed of the transport motor.
Each step increases or reduces the speed by 0.1%.
[-10 to +10/0/0.1%]
6962 Fold Motor Adjustment: Fan Folder DFU
Use these SP's to adjust the fan motor speed to correct skew and offset at the Folder unit entrance.
The fan fold motor drives both pairs of fan fold rollers at the bottom of the Folder unit.
1 Display Paper Length
This SP displays the length of the paper most recently fed into and folded in the Folder unit.
[0 to 32767 mm]
One of two sensors detects the leading edge and trailing edge of the paper, and calculates
the paper length based on the length of time for the paper to pass below:
• On line mode. The Folder unit entrance sensor detects the length of the paper fed from the
main machine.
• Off line mode. The leading edge sensor of the Manual Feeder detects the length of the
paper fed directly into the manual feeder.
2 Display Folded Length
This SP displays the length of the paper most recently folded in the Folder unit.
[0 to 32767 mm]
One of two sensors detects the leading edge and trailing edge of the paper, and calculates
the paper length based on the length of time for the paper to pass below:
• On line mode. The Folder unit entrance sensor detects the length of the paper fed from the
main machine.
• Off line mode. The leading edge sensor of the Manual Feeder detects the length of the
paper fed directly into the manual feeder.
11 Fold Roller Speed
System Service Mode
8
209