Ricoh BE-C1 D046 Field Service Manual page 613

5812 Service Tel. No. Setting
1 Service
2 Facsimile
3 Supply
4 Operation
5816 Remote Service
1 I/F Setting
Selects the remote service setting.
[0 to 2 / 2 / 1 /step]
0: Remote service off
1: CSS remote service on
2: @Remote service on
2 CE Call
Performs the CE Call at the start or end of the service.
[0 or 1 / 0 / 1 /step]
0: Start of the service
1: End of the service
NOTE: This SP is activated only when SP 5816-001 is set to "2".
3 Function Flag
Enables or disables the remote service function.
[0 to 1 / 0 / 1 /step]
0: Disabled, 1: Enabled
NOTE: This SP setting is changed to "1" after @Remote registor has been completed.
6 Device Information Call Display
Controls if the item for initial setting of the screen for the NRS device-information notification-
call is shown.
[0 to 1/1]
0: Enabled. Item initial setting not shown.
Inputs the telephone number of the CE (displayed when a service call
condition occurs.)
Input the fax number of the CE.
These SP codes allow you to enter the telephone numbers to be displayed
for the supply and operation support centers in the User Tools mode.
System Service Mode
GW
GW
8
165