Ricoh BE-C1 D046 Field Service Manual page 621

[0 or 1/ 0 / - ]
0: Disable. Setting the fax unit off-hook does not interrupt a fax transaction in progress. If
the off-hook button is pushed during a embedded RCG-M transmission, the button must be
pushed again to set the fax unit on-hook after the embedded RCG-M transmission has
completed.
1: Enable. When embedded RCG-M shares a line with a fax unit, setting the fax unit off-
hook will interrupt a embedded RCG-M transmission in progress and open the line for a fax
transaction.
Manual Polling
200
No information is available at this time.
Regist: Status
Displays a number that indicates the status of the @Remote service device.
0 Neither the registered device by the external nor embedded RCG device is set.
The embedded RCG device is being set. Only Box registration is completed. In this
1
status, this unit cannot answer a polling request from the external RCG.
201
The embedded RCG device is set. In this status, the external RCG unit cannot answer
2
a polling request.
The registered device by the external RCG is being set. In this status the embedded
3
RCG device cannot be set.
4 The registered module by the external RCG has not started.
Letter Number
202
Allows entry of the number of the request needed for the embedded RCG.
Confirm Execute
203
Executes the inquiry request to the @Remote Gate Way URL.
Confirm Result
Displays a number that indicates the result of the inquiry executed with SP5816-203.
0 Succeeded
204
1 Inquiry number error
2 Registration in progress
System Service Mode
8
173