Ricoh BE-C1 D046 Field Service Manual page 693

These SPs total finishing methods for jobs output from within the document server mode screen
at the operation panel. The finishing method is specified from the print window within
document server mode.
O:FIN Jobs
These SPs total finishing methods for jobs executed by an external application, over the
network. The finishing method is specified by the application.
001 Sort
002 Stack
8067 003 Staple
004 Booklet
005 Z-Fold
006 Punch
007 Other
T:Jobs/PGS
8071
These SPs count the number of jobs broken down by the number of pages in the job,
regardless of which application was used.
C:Jobs/PGS
8072
These SPs count and calculate the number of copy jobs by size based on the number of
pages in the job.
P:Jobs/PGS
8074
These SPs count and calculate the number of print jobs by size based on the number of pages
in the job.
S:Jobs/PGS
8075
These SPs count and calculate the number of scan jobs by size based on the number of pages
in the job.
[0 to 9999999/1]
Number of jobs started in Sort mode. When a stored copy job
is set for Sort and then stored on the document server, the L:
counter increments. (See SP8066)
Number of jobs started out of Sort mode.
Number of jobs started in Staple mode.
Number of jobs started in Booklet mode. If the machine is in
staple mode, the Staple counter also increments.
Number of jobs started In any mode other than the Booklet
mode and set for folding (Z-fold).
Number of jobs started in Punch mode. When Punch is set for
a print job, the P: counter increments. (See SP8064)
Reserved. Not used.
[0 to 9999999/1]
[0 to 9999999/1]
[0 to 9999999/1]
[0 to 9999999/1]
System Service Mode
8
245