Ricoh BE-C1 D046 Field Service Manual page 660

8. Appendix: SP Mode Tables
[-100 to 500/0/10 ms]
Note: An adjustment in the "+" direction sets a longer time, and an adjustment in the "-" direction
sets a shorter time.
12 Fold Plate Halt : Folding
This SP adjusts the how long the fold plates pause on the down stroke at its lowest point near
the fan fold rollers.
[-100 to 500/0/10 ms]
Note: An adjustment in the "+" direction sets a longer time, and an adjustment in the "-" direction
sets a shorter time.
21 Fold Plate Timing : LEdge
This SP adjusts the distance the paper feeds past the fan folder entrance sensor (the sensor goes
ON) before the fold plate starts to descend.
[-70 to 70/0/0.1 mm]
Note: An adjustment in the "+" direction lengthens the distance, and an adjustment in the "-"
direction shortens the distance.
22 Fold Plate Timing: Folding
This SP adjusts the distance that the paper travels past the fan fold sensor pair before the fold
plate starts to descend.
8
[-70 to 70/0/0.1 mm]
Note: An adjustment in the "+" direction lengthens the distance, and an adjustment in the "-"
direction shortens the distance.
31 Fold Plate Movement: LEdge Corner Folding
This SP adjusts the distance that the fan fold plate descends in order to guide the paper into the
fan folding unit for the first fold when corner folding and fan folding have been selected for the
job.
[-200 to +200/0/1 mm]
Note:
• This SP applies only if corner folding the first sheet has been selected for the job.
• An adjustment of 1 step is equivalent to 0.191 mm.
• An adjustment in the "+" direction moves the fan fold plates closer to the fan fold rollers,
and an adjustment in the "-" direction moves the plate away from the fan fold rollers.
32 Fold Plate Halt: LEdge Corner Folding (Japan Only)
212