Ricoh BE-C1 D046 Field Service Manual page 138

2. Installation
2
4. On each side of the unit, insert the pin [1] through the arms of the joint bracket À into the hole in the
lower fan fold unit positioning bracket Á.
• If the pins cannot be inserted because the holes are not aligned, use a wrench to turn the nuts
on the legs under each corner of the fan fold unit until the holes are aligned.
•  and à must both be adjusted with the same number of turns.
• Ä and Å must both be adjusted with the same number of turns.
5. Remove both pins after you make sure that they can be easily inserted.
136