Bridge Unit Installation - Ricoh BE-C1 D046 Field Service Manual

2. Installation

Bridge Unit Installation

Preparation
2
1. If the manual feeder is installed, remove:
[A] Left end cover ( x3)
[B] Right end cover ( x3)
2. From the right side of the fan fold unit, remove:
[C] Right upper cover ( x3)
[D] Right lower cover ( x4)
[E] Right door (L-hinges x2)
3. From left side of the fan fold unit, remove:
[F] Left upper cover ( x3)
[G] Left lower cover ( x4)
108