Ricoh BE-C1 D046 Field Service Manual page 424

4. Replacement and Adjustment
298 to 594 mm
595 to 841 mm
842 to 1189 mm
1190 to 2500 mm
2501 to 3600 mm
3601 to 6000 mm
4
6001 to 15000 mm
15001 to 30000 mm
4. If the measurements do not meet the standards (see the table below), adjust the following SP settings.
SP4961 001
SP4961 002
422
Up to 297 mm
Original Adjustment – Synchro Cut Adjustment 210 mm
Standard: 210 mm ±0.5 mm
Original Adjustment – Synchro Cut Adjustment 1000 mm
Standard: 1000 mm ±1 mm
Less than ±3.5 mm
Less than ±4.0 mm
Less than ±4.5 mm
Less than ±6.0 mm
Less than ±12 mm
Less than ±17.5 mm
Less than ±32 mm
Less than –32 to +200 mm
Less than –32 to +400 mm
Less than ±4.5 mm
Less than ±5.0 mm
Less than ±6.5 mm
Less than ±8.5 mm
Less than ±17.5 mm
Less than ±25.5 mm
---
---
---