Ricoh BE-C1 D046 Field Service Manual page 633

[0x0000 to 0xFFFF/1]
Product ID DFU
3
Sets the product ID.
[0x0000 to 0xFFFF/1]
Device Release No. DFU
Sets the device release number of the BCD (binary coded decimal) display.
4
[0000 to 9999/1]
Enter as a decimal number. NCS converts the number to hexadecimal number recognized
as the BCD.
Delivery Server
5845
These are delivery server settings.
FTP Port No.
1
[0 to 65535/1]
IP Address
Use this SP to set the Scan Router Server address. The IP address under the transfer tab
2
can be used with the initial system setting.
[0 to FFFFFFFF/1]
Delivery Error Display Time
Use this setting to set the length of time that the message is shown when a test error occurs
6
during document transfer with the NetFile application and an external device.
[0 to 999/1 sec.]
IP Address (Secondary)
8
Sets the IP address that is given to the computer that is the secondary delivery server for
Scan Router. This SP lets you set only the IP address, and does not refer to the DNS setting.
Delivery Server Model
Lets you change the model of the delivery server that is registered by the I/O device.
9
0: Unknown
1: SG1 Provided
2: SG1 Package
System Service Mode
GW
8
185