Scanner Separation Unit Type 7140 (D436)
Black Mylars
2
1. Remove the right copy tray [1] (x2).
2. Remove the left copy tray [2] (x2).
3. Turn over both copy trays.
4. Remove the tape [3] from the edge closest to the hole.
5. With its sticky side facing down, set the hole in the mylar over the hook [1], align it with the top edge,
then press down.
6. Remove the second tape [2] from the bottom.
7. Press down on the bottom edge [3].
8. Make sure that the top and bottom edges of the mylar are both flat.
9. Attach the second mylar to the underside of the other copy tray.
251