Ricoh BE-C1 D046 Field Service Manual page 603

0: Enable
1: Disable
Important: Do not change this setting.
Summer Time
Lets you set the machine to adjust its date and time automatically with the change to Daylight
Savings time in the spring and back to normal time in the fall. This SP lets you set these items:
Day and time to go forward automatically in April.
Day and time to go back automatically in October.
Set the length of time to go forward and back automatically.
The settings for 002 and 003 are done with 8-digit numbers:
Digits Meaning
Month. 4: April, 10: October (for months 1 to 9, the first digit of 0 cannot be
1st, 2nd
input, so the eight-digit setting for 002 or 003 becomes a seven-digit setting)
5307
3rd Day of the week. 0: Sunday, 1: Monday
The number of the week for the day selected at the 3rd digit. If "0" is selected
4th for "Sunday", for example, and the selected Sunday is the start of the 2nd
week, then input a "2" for this digit.
The time when the change occurs (24-hour as hex code).
5th, 6th
Example: 00:00 (Midnight) = 00, 01:00 (1 a.m.) = 01, and so on.
7th The number of hours to change the time. 1 hour: 1
If the time change is not a whole number (1.5 hours for example), digit 8 should
8th
be 3 (30 minutes).
1 Setting
3 Rule Set (Start)
4 Rule Set (End)
5401 Access Control
Enables/disables the settings for 002 and 003.
[0 to 1/1]
0: Disable
1: Enable
The start of summer time.
The end of summer time.
System Service Mode
GW
8
GW
155