Ricoh BE-C1 D046 Field Service Manual page 609

Note: The PM alarm goes off when the print count reaches this value (multiplied by 1,000).
2 Original Count DFU
5504 Jam Alarm
5505 Error Alarm
5507 Supply Alarm
5508 CC Call Japan Only
1 Jam Remains
2 Continuous Jams
Continuous Door Open
Enables/disables initiating a call.
3
[0 to 1/1]
0: Disable
1: Enable
Jam Detection: Time Length
Sets the length of time to determine the length of an unattended paper jam.
11
[03 to 30/1]
This setting is enabled only when SP5508-004 is enabled (set to 1).
SC/Alarm Setting
5515
With @Remote in use, these SP codes can be set to issue an SC call when an SC error
occurs. If this SP is switched off, the SC call is not issued when an SC error occurs.
001 SC Call
002 Service Parts Near End Call
003 Service Parts End Call
004 User Call
005 Communication Information Test Call
006 Machine Information Notice
Japan Only
[0 or 1 / 1 / 1]
0: OFF
1: ON
[0 or 1 / 1 / 1]
0: OFF
System Service Mode
8
161