Ricoh BE-C1 D046 Field Service Manual page 201

14. Attach the antenna with the black core [1] to the front pad.
15. Attach the antenna with the white core [2] to the rear pad.
• The antenna with the black core transmits and receives. It must be installed at the front.
• The antenna with the white core only receives. It must be installed at the rear.
16. Peel the seal from a clamp, close the clamp around the cables at [3], and attach the clamp to the
cover.
17. Attach then next clamp [4] 15 cm below the antennas.
18. Attach the last clamp [5] 5 cm below clamp [4].
19. Confirm that the cables are not covering any part of the ventilation port [6].
20. Confirm that the cables are not crossed.
• Cable with the black core to the antenna at the front.
• Cable with the white core to the antenna at the rear.
• To assure reliable data sending and receiving, the antenna with the black core must be
installed at front, and the antenna with the white core at the rear.
MFP Options
2
199