Ricoh BE-C1 D046 Field Service Manual page 632

8. Appendix: SP Mode Tables
This SP is displayed only when the IEEE802.11 card is installed.
WPA Debug Lvl
Selects the debug level for WPA authentication application.
45
[1 to 3 / 3 / 1] 1: Info, 2: warning, 3: error
This SP is displayed only when the IEEE802.11 card is installed.
Supply Name Setting
This SP allows you to enter the names of the supplies that will appear when you push [User
5841
Tools] and then touch "Inquiry" on the operation panel display. After you open this SP,
touch the "Soft Key Board" button then use the keyboard to enter the names of the supplies.
5842 GWWS Analysis Mode Setting DFU
This is a debugging tool. It sets the
debugging output mode of each Net
File process.
8
Bit SW 0011 1111
5844 USB
Transfer Rate
Sets the speed for USB data transmission.
1
[Full Speed]
[Auto Change]
Vendor ID DFU
2
Sets the vendor ID:
Initial Setting: 0x05A Ricoh Company
184
Bit Groups
0 System & other groups (LSB)
1 Capture related
2 Certification related
3 Address book related
4 Machine management related
5 Output related (printing, delivery)
6 Repository related
GW
GW
GW