No.
Name
Slot 2
USB B
Ethernet
Important Notes
• Only two SD Card slots are available for applications.
• The printer option consists of two SD cards: Printer Option (must be in Slot 1) and TIFF/GL filter (must
be in Slot 2).
• The VM card must be inserted in Slot 2 (the service slot). The VM card cannot be used if the printer
option is installed.
• Other applications must be inserted in Slot 1.
• If more than one application is required in Slot 1, the applications must be moved to the same SD
card with SP5873-1.
• Service Slot. Used as the Service Slot for firmware updates, moving
applications to another SD card with SP5873 (Apli Move).
• VM Card (D377-10, -11, -12). The VM card must remain in the
service slot.
• Printer Option (D396) (TIFF/GL Filter SD Card)
Built-in for connection of USB devices.
Note: USB is built-in, but it must be enabled with SP5985.
Standard LAN connection point for network
Description
MFP Options
2
187