Ricoh BE-C1 D046 Field Service Manual page 661

This SP adjusts the length of time the paper feeds before the fan fold plate starts to ascend when
corner folding and fan folding have been selected for the job.
[-100 too +500/0/10 mm]
Note:
• This SP applies only if corner folding has also been selected for the job.
• An adjustment in the "+" direction lengthens the time, and an adjustment in the "-" direction
shortens the time.
33 Fold Plate Timing: LEdge Corner Folding (Japan Only)
This SP adjusts the distance the paper feeds past the fan folder entrance sensor (the sensor goes
ON) before the fold plate starts to descend when corner folding is also selected for the job.
[-70 to 70/0/0.1 mm]
Note:
• This adjustment applies only after corner folding is also selected for the job.
• An adjustment in the "+" direction lengthens the distance, and an adjustment in the "-"
direction shortens the distance.
41 Fold Plate Movement: Paper Exit
This SP adjusts the distance for the fan fold plate to move in order to guide the trailing edge of
the last fold out of the fan folder unit.
[-200 to +200/0/1 mm]
Note:
• An adjustment of 1 step is equivalent to 0.191 mm.
• An adjustment in the "+" direction moves the fan fold plates closer to the fan fold rollers,
and an adjustment in the "-" direction moves the plate away from the fan fold rollers.
42 Fold Plate Halt: Paper Exit
This SP adjusts the length of time that the fan fold plate stops after descending in order to output
trailing edge of the folded copy out of the folder unit after the last fold.
[-100 to +6000/0/1 msec.]
Note: An adjustment in the "+" direction lengthens the time, and an adjustment in the "-" direction
shortens the time.
43 Fold Plate Timing: Paper Exit
This SP adjusts distance that the paper moves after the fan fold sensor pair detects the trailing
edge and switches ON until the fan fold plate starts to move when feeding the copy out of the
folder unit after the last fold.
System Service Mode
8
213