Ricoh BE-C1 D046 Field Service Manual page 46

2. Installation
2
7. Slide two grommets onto each rear copy tray, and set them in the center as shown.
8. Use the holes provided to hang the rear copy tray guides [A] (x3) from the back of the main machine.
9. Set the rear copy tray [B] (x3) into the holes in the support bracket [C] and rear copy tray holder [D].
Testing the Breaker Operation
1. Make sure that the main power switch is off.
2. Check the power cord of the copier and make sure that it is connected to the power source.
• Before you test the breaker, always make sure that the main power switch is off. Do not attempt
to test the breaker switch with the copier power turned on.
44