Ricoh BE-C1 D046 Field Service Manual page 667

45 Fold Length: 1st Fold Peak: A3 SEF
This SP fine adjusts the length of the sections between folds for copies printed on A3 SEF paper.
[-20 to +20/0/0.1]
Note: Adjustment in the "-" or "+" direction decreases or increases the length.
48 Margin Fold Length: Odd (19-30) Section Fold
This SP adjusts the length of odd sections so they come out the same width in order to avoid
"W" adjusted folds in the folded paper.
[-70 to +70/0/0.1 mm]
• If the fold width is wide, the machine calculates the width as soon as the fan fold sensors
(R) or (F) go on.
• If the fold width is extremely narrow, the machine calculates the width automatically and
the fan fold sensors are ignored.
49 Margin Fold Length: Even (19-30) Section Fold
This SP adjusts the length of odd sections after the second fold so they come out the same width
in order to avoid "W" adjusted folds in the folded paper.
[-70 to +70/0/0.1 mm]
50 Margin Fold Length:
This SP adjusts the size of the margin (the first length of the fold used for binding) when the job
has been set up to ignore fan fold sensor input.
[-70 to +70/0/0.1 mm]
51 Margin Fold Length: File
This SP fine adjusts the calculated length of the file flap.
[-20 to +20/0/0.1]
61 Margin Fold Length: Threshold
This SP adjusts the threshold variable that the machine uses to calculate when to do adjusted
folding.
[-70 to +70/0/0.1]
71 Fold Length: 1st Fold: Extra Length DFU
91 Regular Size Fold Switching
This SP determines whether the lengths of the sections can be adjusted for folding standard
paper sizes.
System Service Mode
8
219