Ricoh BE-C1 D046 Field Service Manual page 431

4. Next, select the target destination where the debug information will be saved. Under "5857 Save
Debug Log", touch "2 Target", enter "2" with the operation panel key to select the hard disk as the
target destination, then press .
Select "3 SD Card" to save the debug information directly to the SD card if it is inserted in the service
slot.
5. Now touch "5858" and specify the events that you want to record in the debug log. SP5858 (Debug
Save When) provides the following items for selection.
1 Engine SC Error
2 Controller SC Error
3 Any SC Error
4 Jam
More than one event can be selected.
Example 1: To Select Items 1, 2, 4
Touch the appropriate items(s). Press "ON" for each selection. This example shows "Engine SC Error"
selected.
Example 2: To Specify an SC Code
Touch "3 Any SC Error", enter the 3-digit SC code number with the control panel number keys, then
press . This example shows an entry for SC670.
Saves data when an engine-related SC code is generated.
Saves debug data when a controller-related SC Code is
generated.
Saves data only for the SC code that you specify by entering code
number.
Saves data for jams.
Using the Debug Log
5
429