Counter Display Setting; Print An Smc Report - Ricoh B132 Service Manual

Counter Display Setting

The default setting for the counter is "0" (development). Do the SP setting below to
set the counter for copy/print (paper count).
1. Enter the SP mode.
2. Do SP5045 001 (Counter Display Setting).
3. Select the counter to use:
0 Development counter (Default)
1 Page counter
Important!
• T
HIS SETTING CAN BE DONE ONLY ONCE
SETTING CANNOT BE CHANGED
CONTACT YOUR TECHNICAL SUPERVISOR

Print an SMC Report

1. Go into the SP mode.
2. Do SP5990 001 to print a full SMC report. Keep it in a safe location, with the
factory setting sheet.
SM
. A
FTER IT IS SET TO
. I
F THE WRONG SETTING IS SELECTED BY MISTAKE
.
1-35
COPIER B132/B200
"1",
THE COUNTER
,
B132/B200