Ricoh BE-C1 D046 Field Service Manual page 145

• [B] is the notch (shown at the starting position).
Loosen the screw [C], change the position of the plate, then re-tighten the screw.
The dotted arrows show the range of adjustment up (cw) and down (ccw) (90 degrees). This adjustment
mechanism is the same on the left side of the machine.
Right Side Adjustment
[1] The plate has been rotated right (clockwise) 90 degrees.
[2] The plate has been rotated left (counter clockwise) 90 degrees.
Rotation
90° 1.5 mm
67° 1.2 mm
45° 0.75 mm
Examples
To adjust for
Bridge Unit BU6500 (D407) Folder FD6500A (B889)
2
143