Smc Report - Ricoh G147 Service Manual

5.7 SMC REPORT

1. To enter the SP mode, push and hold down
<Engine>
1.Feed
2. Press or until you see "5.Mode".
<Engine>
5.Mode
3. Press [#Enter].
SP5024
mm/inch Display
4. Press to select SP5990.
SP5990 >>
SP Print Mode
5. Press [#Enter].
SP5990-001
All (Data List)
6. Press or to select the report that you want to print.
SP Title
001 All (Data List)
002 SP (Mode Data List)
004 Logging Data
005 Diagnostic Report
006 Non-Default
G147
What It Prints
Prints all reports
Prints all SP codes settings for SP Groups 1
to 5 with default and current settings.
Prints all SP Code settings for SP7000,
SP800 only.
Prints the Self-Diagnosis report (lists all
firmware modules by name and version
number).
Prints a list of commonly adjusted SP
5-108
for 5 sec. then push [#Enter].
Length
14 pp.
3 pp.
4 pp.
1 pp.
1 pp.
SM