Ricoh BE-C1 D046 Field Service Manual page 243

Scanner Separation Unit Type 7140 (D436)
2
5. Connect the harness [1] and [2] to the scanner relay board (x2).
6. Fasten the two ground wires [3] (x2 Round head, Lock washers x 1 each).
7. On the left side of the main machine, route the other end of the cable through the hole [1] as far as
the CIS board [2].
8. Note the shape and position of the D-connector [3] on the left side of the CIS board.
241