Ricoh BE-C1 D046 Field Service Manual page 306

4. Replacement and Adjustment
4
3. Rotate the unit [1] to remove more developer.
4. Rotate the knob [2] to remove the remaining developer.
Installing the developer
1. Open the first 1 kg pack of developer and pour it into the development unit.
• Slowly add the developer from the first pack into the development unit, while you move the pack
from left to right until the pack is empty.
• An equal amount of developer must be spread along the entire open slot of the development
unit.
• Do not add the second pack at this time.
304