Ricoh BE-C1 D046 Field Service Manual page 185

Adjustment Plates
The photo above shows the right side (viewed from the front of the main machine).
• [A] is the adjustment plate.
• [B] is the notch (shown at the starting position).
Loosen the screw [C], change the position of the plate, then re-tighten the screw.
The dotted arrows show the range of adjustment up (cw) and down (ccw) (90 degrees). This adjustment
mechanism is the same on the left side of the machine.
Folder FD6500B (Cross Folder) (B890)
2
183