Ricoh BE-C1 D046 Field Service Manual page 698

8. Appendix: SP Mode Tables
Back
Number of rear sides fed for scanning:
With an ADF that can scan both sides simultaneously, the Back count is the same as the
2
number of pages fed for duplex scanning.
With an ADF that cannot scan both sides simultaneously, the Back count is the same as
the number of pages fed for duplex rear-side scanning.
• When 1 sheet is fed for duplex scanning the Front count is 1 and the Back count is 1.
• If a jam occurs during the job, recovery processing is not counted to avoid double counting. Also, the
pages are not counted if the jam occurs before the first sheet is output.
8231 Scan PGS/Mode
These SPs count the number of pages scanned by each ADF mode to determine the work
load on the ADF.
1 Large Volume
2 SADF
3 Mixed Size
8
4 Custom Size
5 Platen
6 Mixed 1side/2side
• If the scan mode is changed during the job, for example, if the user switches from ADF to Platen mode,
the count is done for the last selected mode.
• If the user selects "Mixed Sizes" for copying in the platen mode, the Mixed Size count is enabled.
• In the SADF mode if the user copies 1 page in platen mode and then copies 2 pages with SADF, the
Platen count is 1 and the SADF count is 3.
T:Scan PGS/Org
8241
These SPs count the total number of scanned pages by original type for all jobs, regardless
of which application was used.
C:Scan PGS/Org
8242
250
[0 to 9999999/1]
Selectable. Large copy jobs that cannot be loaded in the ADF
at one time.
Selectable. Feeding pages one by one through the ADF.
Selectable. Select "Mixed Sizes" on the operation panel.
Selectable. Originals of non-standard size.
Book mode. Raising the ADF and placing the original directly
on the platen.
Job mixed with printing one/two sides.
[0 to 9999999/1]
[0 to 9999999/1]