Ricoh BE-C1 D046 Field Service Manual page 32

2. Installation
2. Remove the accessories [A] from the back of the machine.
3. Remove all tape and shipping materials.
• Keep the shipping retainers after installing the machine. They will be reused if the machine is
moved to another location in the future.
2
The position of the operation panel can be adjusted to reduce reflection on the operation panel
display.
4. If you want to adjust the position, remove the screws ( x3).
5. Raise or lower the operation panel [1] to one of the three sets of holes.
6. Push each screw [2] into its hole ( x3). (These screws do not need to be tightened.)
7. Pull out the upper tray.
8. Take out the four paper holders and remove their tapes (x 2 each).
30