Ricoh BE-C1 D046 Field Service Manual page 435

Using the Debug Log
require creation. To create a new log file, execute SP5857-011 to delete the debug log data from the
HDD and then execute this SP (SP5857-016).
SP5857-017 Create a File on SD Card to Store a Log
This SP creates a 4 MB file to store a log on an SD card. However, this is not a completely empty file. The
created file will hold the number "2225" as the SCS key number and other non-volatile information. Even
if this SP is not executed, a file is created on the SD card when the first log is stored on the SD card, but this
operation takes time. This creates the possibility that the machine may be switched off and on before the
log can be created completely. If you execute this SP to create the log file beforehand, this will greatly
reduce the amount of time required to acquire the log information and save onto the SD card. With the file
already created on the SD card for the log file, the data only needs to be recorded; a new log file does
not require creation. To create a new log file, execute SP5857-012 to delete the debug log data from the
SD card and then execute this SP (SP5857-017).
5
433