2. Installation
2
3. Do the adjustment:
For
A
B
• In the table above, "cw" means "clockwise", "ccw" means "counter-clockwise".
• The range of adjustment is ±1.5 mm within an arc of 90 degrees (±0.75 mm if rotated only 45
degrees.)
4. To determine the amount of adjustment, divide the amount of measured skew (mm) by 0.0166 mm.
Refer to the detailed instructions below.
Adjustment Plates
The photo above shows the right side (viewed from the front of the main machine).
• [A] is the adjustment plate.
142
Adjust:
Right side
Right (cw)
Right side
Left (ccw)
Turn plate: