Ricoh BE-C1 D046 Field Service Manual page 593

CIS Adjustment Error Flag
4745
This SP displays any black level or white level errors that occur during automatic CIS adjustment
for the scan or copy modes (CS, BC, BS) after the machine is turned on.
SP4745 Settings Table
Flag
1 CS
2 BS
3 BC
4 CS
5 BS
6 BC
7 CS
8 BS
9 BC
10 CS
11 BS
12 BC
CIS Hard Error Flag
Displays a code for the error if any occurs as a result of the communication check with the
CIS done immediately after the machine is switched on. Displays "0000 000" for normal.
Displays a "1" for an error at the bit position.
4746
Bit Error
0 1
1 1
2 1
Level
L
Black
H
L
White
H
Description
Serial output board defective.
Failed to read CIS version information.
Mismatch between version data read and data stored in the CIS register.
System Service Mode
[Range/Default/Step]
[0 to 4095/0/1]
8
145