Mitsubishi Q00JCPU User Manual page 641

APPENDICES
Number Name Meaning
Number of points
SD297
allocated for V
Number of points
SD298
allocated for S
Number of points
SD299
allocated for T
Device
Number of points
SD300
allocation
allocated for ST
(Same as
Number of points
parameter
SD301
allocated for C
contents)
Number of points
SD302
allocated for D
Number of points
SD303
allocated for W
Number of points
SD304
allocated for SW
Time reserved
Time reserved for
for
SD315 communication
communication
processing
processing
No. of modules
SD340
installed
SD341 I/O No.
Network
SD342
No.
SD343 Group No.
Ethernet
Station
SD344
information
No.
SD345
to Vacancy
SD346
SD347 Vacancy
SD348 to Information from
SD354 2nd module
SD355
Information from
to Ethernet
3rd module
SD361 information
SD362
Information from
to
4th module
SD368
TableApp.20 Special register
Explanation
• Stores the number of points currently set for V devices
• Stores the number of points currently set for S devices
• Stores the number of points currently set for T device
• Stores the number of points currently set for ST devices
• Stores the number of points currently set for C devices
• Stores the number of points currently set for D devices
• Stores the number of points currently set for W devices
• Stores the number of points currently set for SW devices
• Reserves the designated time for communication processing with GX
Developer or other units.
• The greater the value is designated, the shorter the response time for
communication with other devices (GX Developer, serial communication
units) becomes.
If the designated value is out of the range above, it is assumed to no
setting.
• Setting range: 1 to 100 ms
• The scan time becomes longer by the designated time.
• Indicates the number of mounted Ethernet module.
• Indicates I/O number of mounted Ethernet module
• Indicates network No. of mounted Ethernet module
• Indicates group No. of mounted Ethernet module
• Indicates station No. of mounted Ethernet module
• Vacancy
(With QCPU, the Ethernet IP address of the 1st module is stored in
buffer memory.)
• Vacancy
(With QCPU, the Ethernet error code of the 1st module is read with the
ERRORRD instruction.)
• Configuration is identical to that for the first module.
• Configuration is identical to that for the first module.
• Configuration is identical to that for the first module.
Corres-
ponding
Set by
ACPU
(When set)
D9
S (Initial) New
U New
S (Initial) New
S (Initial) New
Appendix 2 Special Register List
9
Corresponding
CPU
10
11
Rem
QCPU
Rem
Qn(H)
QnPH
QnPRH
Rem
App
- 46