Mitsubishi Q00JCPU User Manual page 203

5
MEMORIES AND FILES HANDLED BY CPU MODULE
(b) Create a user setting system area
System area type
High speed monitor area
from other station
Online change area of
multiple blocks
(Online change area of
FB definition/ST)
POINT
When formatting the program memory, set the user setting system area capacity.
1) Do not create a user setting system area
The program memory is formatted without the user setting system area being
created.
2) Create a user setting system area
The user setting system area is created during formatting.
There are the following user setting system areas (Table5.6).
Table5.6 User setting system area type
Setting this area speeds up monitoring from GX Developer connected
to a module such as a serial communication module.
When using RS-232 and USB concurrently on GX Developer, this area
is used to register the monitor data from GX Developer connected to a
module such as a serial communication module.
Setting this area enables multiple blocks of data to be changed online.
Refer to the following manual for the number of blocks to which online
program change can be made in this area setting.
GX Developer Operating Manual
When the user setting system area is created, the available area decreases by
the number of created area steps.
The memory capacity can be checked from the Read from PLC screen of GX
Developer. ( (3)(c)in this section)
5.2 High Performance Model QCPU, Process CPU and Redundant CPU
Description
5.2.2 Program memory
1
2
3
4
5
6
7
8
5
- 21