Mitsubishi Q00JCPU User Manual page 343

6
FUNCTIONS
Basic
Note6.41
(6) Error check selection
Note42Çñ
Basic
In the case of the Basic model QCPU, a memory card access error, memory card operation error
or external power supply OFF cannot be set.
Note6.41
(b) Errors that can be set to continue/stop the operation
The following errors can be set to "continue/stop" the operation when they have
occurred.
1) Errors that can be set to continue/stop the operation in PLC RAS setting
of PLC parameter dialog box
• Computation error
• Expanded Command error
• Fuse blown
• I/O module comparison error
• Intelligent module program execution error
• Memory card access error
• Memory card operation error
• External power supply OFF
For example, when the I/O module verification error is set to "continues", the
calculations are continued in the I/O address before the error occurred.
2) Error can be set to continue/stop the operation in detail setting of I/O
assignment setting of PLC parameter dialog box
• Intelligent function module error
The following error checking can be set to "yes/no" at the "PLC RAS" tab screen in the
"(PLC) Parameter" dialog box.
(All parameter defaults are set at "Yes".)
(a) Battery check
(b) Fuse blown check
(c) I/O module comparison
Note6.41
Note42
Note6.41
Note6.41
6.17 Self-diagnostics Function
1
2
3
4
5
6
7
8
6
- 102