Mitsubishi Q00JCPU User Manual page 607

APPENDICES
Number Name
PID bumpless
processing OFF : Forces match
SM774
(for complete ON : Does not force match
derivative)
OFF : Performs link refresh
ON : Performs no link
Selection of link
refresh processing
SM775
during COM
OFF : Performs all refresh
instruction execution
ON : Performs the refresh
Enable/disable local OFF : Local device disabled
SM776
device at CALL ON : Local device enabled
Enable/disable local
OFF : Local device disabled
SM777 device in interrupt
ON : Local device enabled
program
OFF : CC-Link dedicated
CC-Link dedicated
SM780 ON : CC-Link dedicated
instruction executable
PID bumpless
OFF : Matched
SM794 processing(for
ON : Not matched
incomplete derivative)
*1: This applies to the CPU of function version B or later.
*3: This applies to the CPU with serial No. of first 5 digits "04012" or later.
*4: This applies to the CPU with serial No. of first 5 digits "05032" or later.
(8) Debug
Number Name
Trace preparation
OFF : Not ready
SM800
ON : Ready
Sampling trace
preparation
Trace start
OFF : Suspend
SM801
ON : Start
Sampling trace start
Trace execution in
progress
OFF : Suspend
SM802
ON : Start
Sampling trace
execution in progress
Trace trigger
SM803
OFF
Sampling trace trigger
After trace trigger
OFF : Not after trigger
SM804
ON : After trigger
After sampling trace
trigger
TableApp.8 Special relay
Meaning
• Specify whether the set value (SV) will be matched
with the process value (PV) or not in the manual
mode.
• Select whether link refresh processing will be
performed or not when only communication with the
CPU module is made at the execution of the COM
refresh
instruction.
• Selects whether all refresh process or the refresh set
processes
with SD778 is performed when COM instruction is
executed
set the SD778
• Set whether the local device of the subroutine
program called at execution of the CALL instruction
is valid or invalid.
• Set whether the local device at execution of the
interrupt program is valid or invalid.
• Switches ON when the number of the CC-Link
instruction executable
dedicated instructions that can be executed
simultaneously reaches 32. Switches OFF when the
instruction not
number goes below 32.
executable
• Specifies whether the set value (SV) will be matched
with the process value (PV) in the manual mode.
TableApp.9 Special relay
Meaning
• Switches ON when the trace preparation is
completed
• Goes ON when sampling trace is ready
• Trace is started when this relay switches ON.
• Trace is suspended when this relay switches OFF.
(All related special Ms switches OFF.)
• Sampling trace started when this goes ON
• Suspended when OFF (Related special M all OFF)
• Switches ON during execution of trace.
• Goes ON during execution of sampling trace
• Trace is triggered when this relay switches from OFF
to ON. (Identical to TRACE instruction execution
status)
ON: Start
• Sampling trace trigger goes ON when this goes from
OFF to ON (Identical to STRA instruction execution
status)
• Switches ON after trace is triggered.
• Goes ON after sampling trace trigger
Set by
Explanation
(When Set)
Set by
Explanation
(When Set)
S (Status change)
S (Status change)
S (Status change)
S (Status change)
S (Status change)
S (Status change)
Appendix 1 Special Relay List
Corres-
ponding
Corresponding CPU
ACPU
M9
QnA
Q00J/Q00/Q01
U New
Qn(H)
QnPRH
QnA
Q00J/Q00/Q01
U New
Qn(H)
QnPH
Q00J/Q00/Q01
U New *3
Qn(H)
QnPRH
U New
QnA
Qn(H)
QnPH
QnPRH
U New
U New QnA
Q00J/Q00/Q01
U New *4
Qn(H)
QnPRH
Corres-
ponding
Corresponding CPU
ACPU
M9
Qn(H)
New QnPH
QnPRH
New QnA
Qn(H)
U M9047 QnPH
QnPRH
U M9047 QnA
Qn(H)
M9046 QnPH
QnPRH
M9046 QnA
Qn(H)
U M9044 QnPH
QnPRH
U M9044 QnA
Qn(H)
New QnPH
QnPRH
New QnA
App
9
*1
10
*1
11
*1
- 12