Mitsubishi Q00JCPU User Manual page 196

5
MEMORIES AND FILES HANDLED BY CPU MODULE
(2) Write to standard ROM
5
5.1 Basic Model QCPU
- 14
5.1.5 Standard ROM program execution (boot run) and writing
The program memory files are written to the standard ROM by batch-copying them to
the standard ROM.
(a) Before write
Check the following points before writing the files to the standard ROM.
1) Saving the standard ROM files
When files are written to the standard ROM, all files previously stored in the
standard ROM are automatically deleted.
Before writing files to the standard ROM, choose [Online]
on GX Developer and save the stored files using GX Developer in advance.
2) Preparation of files to be written
Since all files stored in the standard ROM are automatically deleted when files
are to be written to the standard ROM, prepare all files to be stored in
advance.
(b) Write procedure
The procedure to write files to the standard ROM will be explained.
1) Choose [Online]
data into ROM] on GX Developer.
2) The Write the program memory to ROM screen appears.
Diagram 5.11 Copy program memory data into ROM screen
3) Select the write destination and copy the program memory files to the standard
ROM.
[Write to PLC (Flash ROM)]
[Read from PLC]
[Copy program memory