Mitsubishi Q00JCPU User Manual page 188

5
MEMORIES AND FILES HANDLED BY CPU MODULE
(4) Write to program memory
5
5.1 Basic Model QCPU
- 6
5.1.2 Program memory
To write data to the program memory, choose [Online]
Developer.
Select "Program memory/Device memory" as the target memory on the Write to PLC
screen and write data to the PLC.
POINT
The file size has the minimum unit. (
The occupied memory capacity may be greater than the actual file size.
Diagram 5.4 Write to PLC screen
Section 5.4.4)
[Write to PLC] on GX