Mitsubishi Q00JCPU User Manual page 277

6
FUNCTIONS
(3) Reactions
Basic Process Redundant
Note6.5 Note6.5 Note6.5
Note5
Basic Process Redundant
The Basic model QCPU, Process CPU and Redundant CPU do not support the AnS series
corresponding modules.
Note6.5 Note6.5 Note6.5
(a) Restrictions on GX Developer version and the relevant modules
When changing the input response time of the high-speed input module or
interrupt module, use GX Developer version indicated in Table6.14.
If GX Developer version earlier than the version indicated in Table6.14 is used,
the module will operate with the default value of the input response time.
Table6.14 Applicable GX Developer version
Module
High-speed input module
Interrupt module
(b) When input response time is shortened
Higher input response time may result in response to inputs being influenced by
noise. Set the desired input response time by taking into consideration the
operating environment of an input module in use.
(c) When AnS series corresponding input module is used
No change can be made to the input response time of an AnS Series
corresponding input module.
When the input response speed is set to the slot of the AnS series compatible
input module or interrupt module, the settings will be ignored.
(d) Timing when settings are ensured
The input response speed setting is valid in the following cases.
• When the PLC is powered OFF and then ON
• When the CPU module's RESET switch is set to neutral position
6.7 Input Response Time Selection of Q Series Modules
Applicable GX Developer version
GX Developer Version 5 (SW5D5C-GPPW-E) or later
GX Developer Version 6 (SW6D5C-GPPW-E) or later
Note6.5
Note5
6
- 36
1
2
3
4
5
6
7
8