Mitsubishi Q00JCPU User Manual page 326

6
FUNCTIONS
6
6.14 Sampling Trace Function
- 85
(b) Setting the Trace Condition
Click the
Trace condition setting
trace conditions.
The trace condition setting can set to No. of traces, Trace point setup, Trigger
point setup, and trace Additional information.
1) No. of traces
The "No. of times" sets the number of times to execute the sampling trace
from trace execution to trace complete.
The "After trigger number of times" sets the number of times to executes the
sampling trace from trigger execution to trace complete.
Trace start
Diagram 6.55 Relation between total number of times and the number of times after trigger
The setting range for each number of times is shown below:
button on the Sampling trace screen and set the
Diagram 6.54 Trace condition setting
Trigger point
After trigger
number of traces
No. of times (Number of total times)
(After trigger number of times)
Trace complete
(No. of times) (8192)